To become a registered electrical contractor in Ireland, you need to register with Safe Electric before carrying out restricted electrical work. The CRU oversees the scheme, while Safe Energy Ireland manages it day to day. Anyone doing restricted electrical work in a home must register with Safe Electric as a Registered Electrical Contractor (REC). Getting registered takes two parts: a craft apprenticeship, then registration.
Don’t get your wires crossed on materials markup. Calculate yours for free!
Looking to register as an electrical contractor in Ireland? Follow these steps.
Restricted electrical work must be done by a registered electrical contractor (REC) on the Safe Electric scheme. The rules are in S.I. No. 264/2013, which comes from the Electricity Regulation Act 1999.
Anyone doing restricted electrical work in a home must register with Safe Electric as a Registered Electrical Contractor (REC). Restricted work includes certain new installations, circuit or distribution-board work, and inspections. Minor electrical works, such as some like-for-like replacements, are excluded.
The rules are set out in the Electricity Regulation Act 1999 as amended, and S.I. No. 264/2013. That requirement only covers homes. Work in shops, offices and factories isn’t classified as restricted electrical work, so an REC doesn’t need to sign it off through Safe Electric.
You don’t automatically need an REC to carry out electrical work in a shop, office or factory. The regulations leave commercial premises work out of restricted electrical works, and many commercial and industrial jobs are classed as controlled works instead. Safe Electric says an REC isn’t legally required for controlled works, although the CRU recommends using one.
That doesn’t mean anyone can do the work. It must still be done by someone competent, or under appropriate supervision. New installations and major alterations or extensions must be inspected and tested by a competent person who must complete a report. If an REC does control work, Safe Electric requires them to issue a completion certificate. Check the project’s certification requirements before work begins.
You may also hear people mention “RECI”, the Register of Electrical Contractors of Ireland, which ran the scheme from 2016 to 2022. Safe Energy Ireland took over in January 2023, so older RECI listings and guides are out of date. Check the register on safeelectric.ie instead.
Step 1: Do a craft apprenticeshipBefore you can even begin your journey to becoming an electrician, you need an employer approved by SOLAS, the national further education and training authority, to take you on as an apprentice. Once you have an offer, they register you with SOLAS within two weeks, and SOLAS then allocates your off-the-job training with a training provider.
Tip: Start by looking for approved employers, not courses. The off-the-job phases follow once an employer has registered you.
Entry requirements
Length and structure
The apprenticeship takes four years and runs over seven phases. Phases 1, 3, 5 and 7 are on the job with your employer. Phases 2, 4 and 6 are off the job. Phase 2 takes place at an ETB training centre. Phases 4 and 6 take place at a technological university, institute of technology or college of further education.
SOLAS introduced new theory papers for Phases 4 and 6 in 2026, so check with SOLAS or your training provider for the current assessment format.
Result: a QQI Level 6 Advanced Certificate Craft (Electrical).
Step 2: Qualify through your apprenticeshipYou will be assessed throughout your apprenticeship with a mix of theory, practical and skills assessments, and exams at set stages.
The content will cover the Irish wiring standard, I.S. 10101, along with inspection and testing and safe isolation. Safe Electric inspects a sample of registered contractors’ work every year, so the standard shapes your work long after the apprenticeship ends.
Tip: Learn I.S. 10101 early. You will use it on every job, and Safe Electric checks registered work against it.
Registering with Safe Electric is how you get permission to do electrical work in Ireland. To register, your business needs a Qualified Certifier (QC), which is a qualified electrician who checks and signs off your work as safe. If you work on your own, that’s you, as long as you meet the qualifications below.
What you need
Tip: the PDH and the QC can be the same person. If you’re a one-person business, you can fill both roles.
Your documents
Insurance
You must hold valid Public and Products Liability insurance with an indemnity of at least €6,500,000. If you employ staff (including apprentices), you are also required to carry Employers’ Liability insurance with an indemnity of at least €13 million. Your insurance must stay active for as long as you are registered with Safe Electric.
Fees and timing
Inspection before self-certifying
After you register, Safe Electric inspects one of your installations within 6 months. Under the CRU Criteria Document (Version 4, effective 24 July 2026), you can’t self-certify electrical work until that inspection is satisfactory.
Step 4: Keep your registration goingRegistration is not a one-off hurdle. Keeping it current takes three habits:
Keep your insurance in force and keep your QC status current. If a REC loses its named QC, the company must notify Safe Electric right away (within 5 working days). Safe Electric gives up to 6 months to assign a new QC, but no certified electrical work can be done until that replacement is in place.
If you got your qualifications outside Ireland, you need to get them officially recognised before you can apply to register. This is a separate step, and you have to do it first.
A panel of experts at the CRU checks your qualifications before you can join the scheme. The fee for this check is €250. See the CRU International Recognition Guidance for details.
UK qualifications no longer carry automatic mutual recognition in Ireland following Brexit. Safe Electric does say some UK-trained electricians can apply directly. These include holders of the EAL Level 3 NVQ Diploma in Installing Electrotechnical Systems and Equipment (awarded on or after 1 September 2010) or the EAL Level 3 Electrotechnical Qualification (awarded on or after 1 September 2015), as well as certain City & Guilds awards on Safe Electric’s list of accepted UK qualifications.
If your qualification isn’t on that list, you’ll need formal recognition through the CRU (€250 fee) before you apply. Check Safe Electric’s current list to confirm your pathway first. You can find the official steps on the Safe Electric site: How to Join Safe Electric.
6. Mistakes that delay you
Getting into the electrical trade in Ireland comes down to two things: finishing your apprenticeship, then registering with Safe Electric. Once you’re registered, you’ll be quoting jobs, booking customers, tracking your hours and chasing invoices as well as doing the electrical work.
That’s where Tradify helps. It’s job management software built for tradies. You can send quotes, schedule jobs, track time and invoice from your phone or computer, so less of your week goes on paperwork.
Try Tradify free for 14 days without a credit card and see how Tradify works for electricians!